Prayag-250 | Hot-Fire
- Engine
- 250 N methalox
- Test setup
- IIT Hyderabad
- Result
- Multiple firings, data acquired, design validated
Prayag Aerospace is building a fully reusable, 30-ton-class heavy-lift orbital rocket for India. It starts with a methalox engine we designed, built and hot-fired ourselves, and we scale it one validated step at a time.
Liquid engine thrust, hot-fired multiple times
Deep-throttling floor on the new injector
Planned hop and autonomous landing
Payload class of our reusable heavy-lift goal
Most rockets fly once. We are building ones that fly, land and fly again, so that reaching space from India costs far less per launch.
Reusability is decided in the propulsion system. A booster that lands has to throttle deep, steer its thrust and survive repeated firings. Our programme is built around those three requirements from the first injector onward, and every step flies the hardware proven in the step before it.
Flying the same booster again spreads the cost of the most expensive hardware over many missions.
Engines, guidance and test infrastructure developed by our own team for India's growing launch demand.
Engine technology and sounding flights serve research labs, industry and defence well before orbital flight.
Our 250 N gaseous methane and oxygen engine has been hot-fired multiple times at our test setup at IIT Hyderabad, with data acquired and the design validated.
| Thrust | 250 N |
| Propellants | GOX / GCH₄ |
| Status | Developed · hot-fire validated |
| Test setup | IIT Hyderabad |
| Mission | 30-ton-class, fully reusable |
The technologies that turn a test-stand engine into a vehicle that can land itself.
Injectors for gaseous methane and oxygen, refined through cold-flow and hot-flow combustion CFD.
A throttleable injector and engine up to about 300 N that runs down to 20% thrust for hover and landing.
A metal 3D-printed engine with regenerative and film cooling for longer burns and repeat firings.
Two-axis gimbal control that keeps the vehicle stable during powered ascent and descent.
A re-landing algorithm with its own test setup, proven first on a propeller-driven lift-off and landing rig.
Our hot-fire test setup at IIT Hyderabad, with ignition systems, flame diverter, remote valve control and CCTV monitoring.
Each step has to work before we scale. The 30-ton heavy-lift vehicle is designed in parallel so early choices carry forward.







Led by our founder, guided by faculty advisers from IIT Hyderabad and supported by technical interns.
M.Tech, IIT Hyderabad. Best Thesis Award. Leads technology, partnerships and fundraising.
Assistant Professor, IIT Hyderabad
Assistant Professor, IIT Hyderabad
+ Five technical interns working across propulsion, CFD and test operations.
We are speaking with investors, research labs that need flight time for instruments, and organisations interested in our engine technology.